Metal pipes are the principle of measuring material flow
Metal tubes measure the flow rate of the variable flow rate of the volumetric flow of liquids and gases operating on a floating principle. The device has a conical metal tube in which a float is allowed to move freely up and down. Floating When the upward force is equal to the floating weight by the moving fluid. The position of the float is transmitted to the scale by a magnetic coupling system. The rotational motion of the following magnet system is transmitted to the linear indicator and the flow velocity is indicated directly on the scale
Measuring the flow of metal pipes
The ﬂ ow path has a cone section. The oatmeal contains a magnet in a sloping tube. The fluid flows from the bottom of the flowmeter and goes up through the tube. The differential pressure produced by the float and the conical tube pushes the float upwards, and when the float weight and the differential pressure equilibrium of the float stop, the float stops. In other words, the position of the float corresponds to the velocity of the flow
Although the pipe and thread are welded by high-frequency induction heating (BPW) with high-frequency induction heating, TIG welding may be used in some specifications
Rose Calibration Company in Melbourne, Australia with over ten years of experience provides all calibration, maintenance, and repair services throughout Australia. If you live in Sydney, Melbourne, Adelaide, Perth, Geelong, and Brisbane, you can receive your quote in less than two hours by fill-up the form via the “Booking” link.