Millibar gauge is one of the most important quantities measured in industrial units, pressure quantity.
To determine the type of instrumentation equipment, usually one of the items that is always in question is the system pressure and therefore its maximum tolerable pressure.
Therefore, we always need equipment to be able to announce the system pressure according to environmental conditions and related standards and act accordingly.
Millibar manometer is a very accurate type of barometer that is mostly used to measure gas lines or to test industrial lines and parts.
Millibar manometers are structurally different from load gauges, but their general mechanism of operation is the same.
Manometers are usually rated in millibars, inches of water, and millimeters of mercury.
The millibar manometer is one of the most accurate pressure measuring devices.
.The millibar manometer is the most accurate instrument for measuring pressure
The maximum pressure range of 1000 bar is positive or negative and normally we do not have a 2,000 gauge gauge
.But technically, gauges larger than 1000 millibars can also be produced
.The application of millibar manometer is for low pressure and accurate gas and air lines
Application of millibar gauge
The millibar manometer is used to compare the amount of pressure measured by the pressure gauge and the correct actual pressure, which is commonly used in pressure calibrators, dead wit tester as well as pressure pump.
These pressure gauges are often used to test the accuracy of other pressure gauges.
In choosing a reference sphygmomanometer, in addition to whether it is digital or analog, the accuracy of the sphygmomanometer resolution and, most importantly, its pressure range should be considered.
Usually the accuracy of the reference barometer is more than half a percent full scale.
Types of millibar gauges
Types of millibar manometers with different brands, including:
INDUMART pressure gauge / INDUMART pressure gauge
TG1 pressure gauge / TG1 pressure gauge
ASHCROFT pressure gauge / ASHCROFT pressure gauge
NUOVA FIMA pressure gauge / NUOVA FIMA pressure gauge
FIMA pressure gauge / FIMA pressure gauge
DRUCK PRESSURE GAUGE / DRUCK PRESSURE GAUGE
PAKENS pressure gauge / PAKKENS pressure gauge
WINTERS pressure bar / pressure gauge .WINTERS
Rose Calibration Company in Melbourne, Australia with over ten years of experience provides all calibration, maintenance, and repair services throughout Australia. If you live in Sydney, Melbourne, Adelaide, Perth, Geelong, and Brisbane, you can receive your quote in less than two hours by fill-up the form via the “Booking” link.