Honeywell L404F pressure switch
Pressure switch (Honeywell pressure switch L404F) is widely used for a wide range of applications across industry and manufacturing. Their function is to provide electrical feedback in response to measured increases or decreases in pressure. The Honeywell pressure switch is usually adjustable according to the selected operating point.
Also known as pressure sensors , they are used to respond to liquid pressure. For example, pneumatic switches in compressors and pumps or hydraulic switches in automotive engineering.
As an industry leader in software engineering, Honeywell specializes in providing products for a wide range of measurement applications. For simple monitoring systems, we offer Honeywell unipolar launch switches, while for more sophisticated and advanced needs, we offer a range of bipolar launch switches.
Depending on the application of the pressure switch, different models can be offered that best suit your needs. Whichever Honeywell pressure switch you choose, you can be sure that it will provide a fast, reliable and consistent response, regardless of its function.
Honeywell wide range
Honeywell We provide a wide range of companies and businesses in a wide range of needs. This can include anything from very powerful and accurate electronic pressure switches to differential pressure switches. If you are not sure which product is more suitable for you, do not hesitate to contact eShop Sanat today. You can talk to a team member who can give you expert advice and guidance.
Each of our pushbuttons is made to the highest standards. This is to ensure their durability, reliability and durability. They have been thoroughly and comprehensively tested and are available at very competitive prices. Please search our products for more information.
Features of Honeywell pressure switch
- Models available in a set of control ranges and pressure scales in kPa and psi.
- All models reset automatically and have adjustable differences.
- The models have a snap switch to open or close the circuit at increased pressure.
- The case has a clear plastic cover, so the specified values can be seen.
- Fittings 1/4 inch – 18 NPT for pipe mounted on diaphragm.
- Ground screw terminal.
- Controllers may be used with steam gases, air or non-combustible gases, or inflexible liquids to the pressure gauge.
- High pressure limit, breaking circuit at oil pressure
Climb from the set point.
- Low pressure limit increases oil pressure in higher amounts.
Application of Honeywell pressure switch
The L404F PressureTrol® controller provides operational control with limited automatic protection for systems with pressures up to 2070 kPa or 300 psi.
L404T controllers, V PressureTrol® are suitable for use in oil refueling systems for pressures up to 1035 kPa or 150 psi
Pressure measuring element:
Stainless steel diaphragm (models 140 to 2070 kW) has brass needles.
Maximum ambient temperature:
66 degrees Celsius (150 degrees Fahrenheit).
Screw on top of the product. Scales are specified in psi or kPa.
Installation: 1/4 inch -18 NPT connection on the assembly diaphragm; Or the base surface using the hole in the back of the product.
Rose Calibration Company in Melbourne, Australia with over ten years of experience provides all calibration, maintenance, and repair services throughout Australia. If you live in Sydney, Melbourne, Adelaide, Perth, Geelong, and Brisbane, you can receive your quote in less than two hours by fill-up the form via the “Booking” link.