Sale of German Anders Hauser pressure transmitters from PMC71, PMD75, PMP71 and models, price of Anders Hauser pressure transmitters
Endress & hauser started from a small business and today has become one of the largest suppliers of instrumentation worldwide.
Endress & hauser company has gone through difficult conditions and great progress.
In 1953, the two companies together completely different man Andreas Hauser, Endress & hauser in a private apartment in Lörrach ( Lörrach ) Germany founded.
One was a tall, strong Swiss engineer, 29-year-old Georg H Endress, and the other was a 58-year-old German bank manager, Ludwig Hauser.
The transmitter is a combination of the two words TRANSFER + METER.
That is, equipment that can measure a physical quantity (METERING) and transfer it to a more remote location, such as a TRANSFER control room.
It can be pneumatic or electronic.
In both cases, the transmitted signal is standard and understandable for the equipment in the LOOP control.
In the electronic type, the current is 4-20 mA and in the pneumatic type, the air pressure is 3-15 PSI or bar is sent to the electronic and pneumatic controllers by TRANSMITTER.
In other words, industrial transmitter is a tool that is used to measure various quantities and parameters such as temperature, pressure, humidity, liquid level, flow, ambient gases and the like, and the measured values as a standard electric current. In the range of 4 to 20 mA, they send a pair of wires.
Isolated transmitter (TRANSMITTER) is used to convert various types of analog signals with excellent accuracy and quality.
Supports all different signals and measurement ranges including 4 to 20 mA DC signal, 0 to 20 mA DC, 0 to 5 V DC, 0 to 10 V DC, Thermocouple types J, K, B , R, S, T, E, N, RTD and PT100 types, Potentiometer, Resistance.
Input and output completely isolated against noise and power fluctuations, filtering and signal amplification are important points in the transmitter.
The output obtained from transmitters can be used in monitors, PLC systems and all control equipment, and today transmitters are widely used in oil, gas, petrochemical, steel, cement, casting, pharmaceutical, medical engineering and so on. Kelly has found any system that needs industrial automation.
When a force of F is applied to a certain surface A, tension is created in the components of that surface which causes the components under stress to be compressed.
The smaller the force, the more pressure is applied.
Even if the force applied to a certain level increases, the pressure applied to the surface increases.
The amount of force applied to a surface is defined as the pressure represented by the symbol p.
As we rise from the ground in the troposphere to the higher layers, the air temperature decreases and as a result the air pressure decreases.
Some laws of pressure state that as the air cools, so does the pressure;
This law is at the Earth’s surface, but the farther we go from the Earth in the troposphere, the thinner the air and the lower its density due to reduced gravity;
When the air becomes thinner, it means that there are not many air molecules there and therefore the pressure is low.
This rule is mostly used at the top of mountains or flying at high altitudes
Another type of product that has a lot of user pressure in refineries and manufacturing industry is Anders Hauser pressure transmitter.
This equipment is suitable for measuring pressure, surface, volume, mass for liquids and gases.
Anders Hauser pressure transmitter is designed for pressures above 700 bar .
One of the outstanding advantages of this product is its quick start-up with adjustable measuring range.
Rose Calibration Company in Melbourne, Australia with over ten years of experience provides all calibration, maintenance, and repair services throughout Australia. If you live in Sydney, Melbourne, Adelaide, Perth, Geelong, and Brisbane, you can receive your quote in less than two hours by fill-up the form via the “Booking” link.