Yukogawa YTA110 temperature transmitter
A Yukogawa temperature transmitter is a device that reads a temperature sensor signal, then converts it to an analog or digital signal. If you have to install a sensor away from your control room, you increase the risk of distortion and interference. So you want to be a transmitter to amplify and transmit the signal to the control room.
This type of temperature transmitter is connected directly to the process, which is usually installed near the sensor for a stronger signal. Therefore, this type of transmission provides a secure signal with an amplified signal.
You can prepare them with a double chamber to protect the chamber from moisture and humidity. Field enclosures typically come in die-cast aluminum or stainless steel, but you can easily install the display if needed.
Temperature is an important parameter to measure, so you should consider aspects such as accuracy, installation, cost and maintenance when buying a transmitter. If you know the specifications of your steps, then a good source can help you choose the right temperature transmitter for your needs.
YTA110 High performance temperature transmitter that accepts thermocouple, RTD, ohm or DC inputs and prepares it for a 4 to 20 mA DC signal. YTA110 supports BRAIN or HART communication protocol.
microprocessor-based sensing technology for
long-term accuracy and high reliability.
Two enclosures, high resistance capability in harsh environments, YTA110 has SIL2 capability for greater safety.
Types of sensor inputs The
type of sensor input can be selected by multi-purpose thermocouples or DCs.
communications The SRAIN or HART® communication protocol is available. Device configuration can be communicated using BT200 or HART.
Continuous automatic detection capability and long-term performance guarantee lower ownership costs.
screen The LCD screen simultaneously displays a digital display and a graph percentage.
(A / D accuracy / Span + D / A accuracy) or ± 0.1% of calibrated distance
(T / C only) ± 0.5 ° C (± 0.9 ° F)
Effect of ambient temperature (change in temperature of 10 ° C)
. 0.1 ٪ or ± (temperature / distance coefficient)
Rose Calibration Company in Melbourne, Australia with over ten years of experience provides all calibration, maintenance, and repair services throughout Australia. If you live in Sydney, Melbourne, Adelaide, Perth, Geelong, and Brisbane, you can receive your quote in less than two hours by fill-up the form via the “Booking” link.