Anders Hauser Temperature Transmitter
Temperature transmitters are used in industrial production as a tool to control the process because they can provide temperature-related feedback during different stages of the production process. To do this, a transmitter collects the signal generated by a temperature sensor such as a thermocouple and then uses the signal to calculate the heat level. Next, the temperature data is converted to another type of signal and transmitted to the receiving device.
This type of special temperature transducer is installed in its outer chamber, allowing it to be used in the “field” where conditions may require more protection, such as high-performance industrial operations. Field-mounted transmitters can be located relatively close to the sensor to increase signal strength.
Anders Hauser E + H iTEMP TMT142 temperature transmitter provides reliability, accuracy and long-term stability in important processes in all industries. This adjustable transmitter not only transmits signals converted from RTD sensors and thermocouples, but also transmits resistance and voltage signals using HART communications. It visualizes these signals on its backlight display. A rugged terrain can create a direct connection to process areas. In addition, quick and easy operation and maintenance can be done using a computer and operating software.
- Bright and rotatable screen
- FieldCare operating software
- Sensor monitoring
- Approvals: ATEX, FM and CSA
- Galvanic separation
- Records minimum and maximum temperatures
- General input usable for:
Resistance sensor (RTD)
Thermocouples (TC)
Resistor transmitter (Ω)
Voltage transmitter (mV)
- HART protocol
The Anders Hauser temperature transmitter converts sensor signals into stable and standard output signals for all industries, providing long-term reliability, accuracy and stability in critical processes in all industries. The adjustable Anders Hauser temperature transmitter not only transmits the converted signals from the RTD and thermocouple sensors, but also transmits the resistance and voltage signals using the HART connection. Displays these signals on your screen. Strong field chambers allow direct communication in process areas. In addition, quick and easy operations and maintenance can be performed by the computer using the executable software.
The advantages of Anders Hauser temperature transmitter are:
- Bright, rotatable screen
- Computer operations, imaging and maintenance, for example using FieldCare operating software
- Sensor monitoring: Incomplete ventilation, corrosion detection to NAMUR NE 89 and in case of sensor failure or sensor short circuit, compatible with NAMUR NE 43
- Optional stainless steel housing for EEx applications d
- Certifications: ATEX (EExia, EEx d and dust ignition-proof), FM and CSA (IS, NI, XP and DIP)
- Galvanized separation
- max Registered processing value
Areas of application of Anders Hauser temperature transmitter
- Temperature transmitter with HART protocol to convert different input signals to an analog output signal ..20 mA
- Universal input usable for: Resistance Thermometer (RTD), Thermocouple (TC), Resistor Transmitter (Ω) and Voltage Transmitter (mV)
- HART protocol for on-site device use using manual terminal (DXR375) or remotely via PC
- Optional stainless steel housing for EEx applications d